Circuit Breakers:

Infraspection Institute 

Infrared Inspections of Arc Fault Circuit Interrupters

Excess heating is often a sure sign of defective electrical equipment; however, the absence of heat can also be a sign of component failure.  In this Tip, we demonstrate how thermal imaging may be used to detect defective Arc Fault Circuit Interrupters.

An Arc Fault Circuit Interrupter (AFCI) is an advanced type of electrical circuit breaker that automatically opens a circuit when it detects a dangerous electrical arc on the circuit it protects.  Designed to help prevent electrical fires, an AFCI can sense between electrical arcs caused by defective equipment versus those associated with the normal operation of devices such as light switches.

In order to monitor for dangerous electrical arcing on a circuit, AFCI devices have electronic circuitry built into them.  This circuitry can cause the body of the AFCI to run several degrees warmer than ambient temperature.  Depending upon the settings of your thermal imager, these devices may show a marked contrast to their surroundings.

Infrared Inspections of Arc Fault Circuit Interrupters

Thermogram shows three out of four AFCI devices operating at ambient temperature.  These devices had failed and were no longer protecting against arc faults.  Images courtesy Houston Thermal Inspections and Infrared Imaging.

When thermographically inspecting AFCI devices, be sure to inspect the line and load side connections at the AFCI device as well as the neutral bus bar connection for the subject breaker.  Should you find an AFCI device that is operating close to ambient temperature, it is likely that the internal circuitry has failed making the device incapable of protecting against arc faults.  Such devices be further tested and replaced should they be found defective.   

Infrared inspection of power distribution systems is one of the many topics covered in all Infraspection Institiute Level I training courses.  For information on course locations and dates or Distance Learning Courses, visit Infraspection Institute online or call 609-239-4788.

Click below to download: Infrared Inspections of Arc Fault Circuit Interrupters.